--------------------------------------------
Class 700 Sound Mod Changelog
--------------------------------------------

---Latest Version: 16

This is the change log. It's a log of all the changes so that it's not clogging up the download page.

---Version 16:

-E

---Version 15:

-TSW4
-New PCFM sounds

---Version 14:

-Improved attenuation for traction motors
-Changed range where FM bandwidth widens on AC mode to sync

---Version 13:

-Fixed one of the rumble sounds being really high pitched by 78mph
-Changed motor sync by 5km/h
-Reduced pitch of motors (too high at sync)

---Version 12:

-Increased running sound concurrency to 4 from 3
-Decrease motor sound concurrency from 5 to 4
-Train should sound more natural when passing at no cost
-New AWS, DVD, and TPWS alarms - all are louder
-Remixed all rumbles and rattles with nearly twice the variety
-Includes wheelflats, seat and carriage rattles, wind whistle, and gear rumble
-Some sounds are louder than other, and the chance of one is random upon load-in
-Remixed guard-driver departure signal for random delay, if used

--Version 11:

-Fixed low speed flange sounds not playing
-Reduced volume of medium speed track joints by 25%
-Fixed cab rumble suddenly spawning
-Added fade in of cab rumble when teleporting to the other driving cab
-Changed concurrency to "Stop Farthest Then Oldest" rather than "Stop Oldest"
-The immediate cab should be prioritised most of the time
-Cab rumble should play in both cabs at no cost

---Version 10:

-Fixed kilo rattle

---Version 9:

-Having quieter running sounds on the exterior is stupid
-Fixed giga rattle

---Version 8:

-Subtle fast and slow rattle recordings with randomising pitch and loudness
-More responsive high tone in the cab
-Fast, medium, and slow flange sounds
-Fast, medium, and slow track joints: separate interior/exterior volleys
-Added the magnetisation sound on AC and not just for DC
-Added dedicated horn switch sounds
-Volume balanced running sounds so that they don't get so loud with speed
-Decreased interior running sound volume by 25%
-Total of 65 new sounds

---Version 7:

-Noise reduction of inverter sound on DC which needed it
-Added oneshot sounds of the inverter when taking off (realistic)
-Try taking a small amount of power to hear the engagement for yourself

---Version 6:

-Added two additional sounds for the inverter on DC
-Increases the amount of PCFM development heard
-Audio of pitch-curved clips more natural between 15mph and 25mph
-There will be another update later for improved noise reduction

---Version 5:

-Clearer wheel/rail sounds of the Siemens SF7000 based on feedback
-Doubled loudness of the interior running sounds based on feedback
-No sounds have been added or removed, only enhanced

---Version 4:

-Added additional air absorption / distance-fading to running sounds
-Increased attenuation distance for running sounds to be heard further away

---Version 3:

-Reduced stereo width of the horns

---Version 2:

-Compromised on use of interior motor sounds due to serious channel limit
-Remixed motor sounds to reduce number of simultaneous voices
-Remixed running sounds to reduce number of simultaneous voices
-Partially fixed the cutting out of inverter sounds on SEHS
-You may still lose the quietest motor sound if the Class 465 passes at speed
-Let me know of any other issues while I attempt to fix this further

---Version 1:

-WIP
-Recorded Class 700 PCFM traction sounds for AC and DC with custom mix
-Recorded Class 700 horn and depot horn with custom mix
-Recorded Class 700 rail and wind sounds