GBRf 66 Pack v1.3.2

poor research on my end, i'm looking in to it.

Same issue and i've reinstalled is there a solution?

Have the AP files for the Powerhaul Class 66 and WCML Trent Valley been extracted, if the file has not been extracted, then that might be the cause of the problem.

Hopefully this will answer your question

This issue should hopefully be fixed in 1.3.1 @Little

Yes, this is an error on my end, I've sorted it, it's hopefully been sent for review now.

This appears to be a script issue, do any of the others appear like this ?

A small number of the mainland ones have overlapping logos, And I noticed that a few 66's numbers are missing textures. In terms of headlight functionality, It is only this variant which has this issue.

OK, I'll look into it.

I've sent the update for review.

Thank you!

The update is live.

It appears I've forgotten to add the textures, 66796 i was testing something but forgot to revert it back to the original, I do apologize. I've submitted the update for review. Thanks.

Brilliant, Thanks again for brilliant addon !

Update is live, It should hopefully work now

Do you have v1.3.1 ?

I do apologise for this, I'll try and get a patch out.

The patch is live, hopefully it should be fixed now.

Thank you very much, will 66725, 66791 and the locos with the other nameplates be added?

I did 66725 but wasn't happy with the texture quality so didn't include it. 66791 isn't realistically possible with the 66 models we have ingame. I did make a botched version but didn't feel comfortable releasing it. I actually intended to make 66719 but forgot, same as the nameplate on 66781.

You could add 66719 if you like, even though 66725 will have bad texture quality, that could be overwritten by using another loco, but this does not affect any child objects used on it. Why were you uncomfortable releasing 66791?

https://flic.kr/p/2o8vzCd 66791
https://flic.kr/p/2nnXgZp 66795 for comparison

Just below the window on 791, you can see a white rod, we currently don't have any 66s ingame with the rod like this hence i chose to skip it. The decal on the side was the issue with 725, i couldn't find clear enough pictures at the time, I'll probably look into it again later though. I do plan to do 719, when i can the time 😅.

That's fine then. You could add 66791 if you like, it is up to you.

Thanks! Can you tell me which 66s aren't working?

It seems to be the 70x series so the lower numbered ones, and ones such as the Green HS2 and wascosa (?) ones. I suspect the 300 series ex DRS ones too.

Also for the loco’s with default sounds the high tone on the horn doesn’t work.

Which version do you have? They work on my end.

1.3.1. Should I try reinstall the AP pack again?

Yes.

That's fixed it! Thanks for your support, and once again brilliant pack. Wagons are awesome too.

Nice! Thank you.

What version do you have?

The most recent one, I downloaded it yesterday

Do you have all requirements?

Hello, do you have the requirements enabled in the editor?

Yes I tick all the requirements however some will completely or some will with the lights, some decals and the driver and that’s it or just not appear

Is it possible to make a list of the ones that don't work? So i can check it on my end.

66/3’s (all), 66702, 703, 704, 705, 706, 707, 720, 722, 723, 724, 726, 728/29/30/64ect, 732, 749, 750, 751, 752/56/57/58/59/60, 753, 754 both pre and post, 755, 761/62/63/74/78, 790, 792, 795, 796, 797, 798, 799

They work fine on my end, do you have the WCML Trent valley and the Class 66 Powerhaul?

Yes, every time I’ve tried re-install it says about some “The system cannot find the file specified.” I’ll attach a screenshot below

Very odd, I've just downloaded it myself and it seems to work. 🤔

I'm out of ideas, the answers here may help (I had to do it also while writing the .bat so it could work, i used to get the same errors before too):

https://superuser.com/questions/581587/7-zip-not-working-from-the-dos-prompt-or-command-line

Hey, I found out what the issue was. The issue was surprisingly simple to resolve, I just had to copy the emd_66_DRS from the FL_AP from the Thompson folder, Sorry for the hassle!

No worries, sorry on my end because the .bat is supposed to do that automatically :).

Please refer to the comment above. If you still get the errors after attempting the resolves, I'm out of ideas :(

Hi, are you getting the same errors as above?

Indeed

The comments in the link above may help, if not then I'm not sure sadly :(.

Wot Did you use to install the pack? It could be my Installer

7zip, it worked on my end.

What issues are you having?

What Installer did you use

7zip

Are you getting errors when trying to run the .bat file?

So sorry for the late reply, yeah, I get a load of not specified errors.

You'll have to go to "Assets\Thomson\WCMLTrentValley", open the "WCMLTrentValleyAssets.ap" with 7Zip, then go to "RailVehicles\Diesel\Class 66\DRS" and copy the "emd_66_DRS.GeoPcDx" and paste it into the following folders:

GBRf_66301-305
GBRf_66302
GBRf_66720
GBRf_66722
GBRf_66723
GBRf_66724
GBRf_66726
GBRf_66728-30 64-68 70-72 76 77
GBRf_66732
GBRf_66749
GBRf_66752 55-60
GBRf_66753
GBRf_66754_Pos
GBRf_66754_Pre
GBRf_66755
GBRf_66761-63 774 778.

Then go to "Assets\RSC\Class66Pack05", open the "PowerhaulClass66Assets.ap" with 7zip, go to "RailVehicles\Diesel\Class 66\FL" and copy "emd_66_FL.GeoPcDx" then paste in the following folders:

GBRf_66702 through to GBRf_66799.

I apologise for this, the .bat is supposed to do this automatically :/

AH I can't thank you enough for your help and for making this, the reskins work like a dream, absolutely amazing, great work on both this and the wagons.

Thank you!

RailWorks\Assets\Thomson I believe

I found it but it says when installing its not found

You may need to extract the .AP with 7zip. The .bat was supposed to do this without the end user needing to but it didn't work for some people, I'm not sure why.

Update!

I have also found that 66708-717 are also working correctly. That convinces me even more that the problem is with the WCML TV '66'. I have found that there are no BIN files in any of the WCML TV '66' reskin folders, only GEO files, is that correct?

Thanks
Terrone.

Hello Terrone, the missing .bins is as intended, could you look in "Assets\RSC\Class66Pack03\Railvehicles\Diesel\Class 66\GBRf_C70015" and tell me what you find?

Hi there, thanks for getting back to me.

In the "Class66Pack03\GBRf_C70015" There is the following

That seems ok, you have WCML Trent Valley ticked right? The only thing it needs from the WCMLTV folders are the .Geos and the textures within the "Textures" folder. The bins for that are within the EWS 66 folder (Class66Pack03 i believe)

Yes I do, it's very strange, I have all of the requirements, and everything ticked, it just seems to be the Trent Valley 66's that are not showing.

2 questions, does 66702 - 7 and the Euro 66s show?
What version of Train Simulator are you on?

Hi. None of 66702-7 show, nor do any of the Euro 66's. Only 66708-717, and 66733-745 show. I am running the latest version of Train Simulator.

Ah alright, I haven't tested it with the new version. I'll see what I can do.

Thank you, that would be very kind. TS doesn't usually baffle me this much, but it has knocked me for 6 this time!

Thanks again.

I'm baffled myself, I've installed it on the new TS version and it works fine.

Did you get any errors with the .bat ? Similar to what Trainspotter_scott mentioned on the 4th of March.

No i didn't. I'm considering letting Steam do a file verification for TSC, and see if that solves it because i simply don't know what else to try.

Try reinstalling the AP pack then this pack. If not then yea.

Does the EWS and Freightliner powerhaul (the Steam version, not AP) show ingame?

Success!! Nothing seemed to work, so i bit the bullet and did a file verification, reinstalled the pack and all is well!!.......And i have to say that you have done an absolutely cracking job with them!! I also have your wagons, and they too are superb.

Thank you, and well done.

I do have another question for you........How hard of a job would it be to maybe port over the Euro 66 reskins onto the BR CLASS 266 (66) that comes with the DTG MRCE Dispolock Loco pack? The Euro 66 in this pack has the Euro style cab, which i know some, if not all, of the GBRf Euro 66's have.

Thanks.

Thanks, very nice, It'd be a bit of work as: 1, both models have different texture mappings and 2, the 266 in that DLC has a 5th door which the GBRf EU sheds don't have (excluding the new 66306+). I may be able to set it up similar to how I did with the WCML TV 66s (I wasn't satisfied with the Trent Valley 66 cab so I ported the model over to the EWS 66 and hid the EWS body with a script) but I don't own the MRCE pack and I'm not sure how it'd react to the AP EP (the reverser key for example).

Ah, I see.......is there any way that I could private message you?

Via the TSC discord. @ah9286 is me

Thanks, but i can't seem to finder you there.

Check the "TS-Modding" channel, "γɿɘƨim ɘʜɈ ʜO" is my server name, ah9286 is my profile name.

Ah, i see. I have sent you a message on there.