This is the ACS-64 Enhancement Mod for Train Simulator. This mod completely overhauls the ACS-64, with completely new sounds, physics, textures, features, and more!
Important Information:
Make sure you are using the Player version of the ACS-64, otherwise you will be using the AI ACS-64 which has a speed controlled bell sound, plays sounds differently, and has all player usable features removed including actually operating the locomotive. You will have to make custom consists.
Mod Information:
Replaced every single sound.
Added new sounds.
Added new functions.
Bell sounds play from the front and end of the locomotive.
Engine sounds play from the front and end of the engine room.
Changed throttle and brake notches.
Added new headlight flares.
Added marker light flares. (Only available on the ND version of the ACS-64 and they cannot be turned off)
Changed some textures.
Added Siemens logo decals.
Added Siemens logo texture on bogies.
Added new preload consists. (Will not work without my Amtrak Amfleet Enhancement Mod and the required DLC's)
Added Player and AI versions for less memory usage, better optimization, and better sounds. (This will apply to all default AI trains)
Keybinds:
Low Horn: N
Horn Sequencer: C
Train Approaching (Male Voice): M
Train Approaching (Female Voice): CTRL + M
Radio End: U
Known Issues:
The two bell sounds go out of sync when passing the camera. (Unfixable)
Some of the Siemens logo textures on the bogies are mirrored. (Unfixable)
Safety systems can't be acknowledged in Suppression braking. You have to go into Full Service. (Unfixable at the moment)
Marker light flares stay on even without the marker lights on. (Unfixable at the moment)
The throttle on the Washington - Baltimore varient of the ACS-64 does not work.
Some preload consists are doubled in the main menu.
Some sounds don't play in some routes due to high asset rates. (Unfixable)
Scenarios use AI trains as player trains.
Mod Credit: CTSL Railfan, Amtrak, Alstomatic, Dovetail Games, Matt Jauchler, Fan Railer, Nick Lupo, ALMTrains, Bob Robert, Gregory Grice,
Trinity Court Studios
DO NOT UPLOAD THIS MOD TO ANY OTHER SITES WITHOUT MY PERMISSION
Requirements
Train Simulator: NEC: New York-New Haven Route Add-On
Installation Instructions
Mod Installation:
To get this mod to work, move the 'Assets' file from the 'AmtrakACS64EnhancementMod' file into '(your steam directory)\RailWorks'. If you get a prompt asking you to replace the files, select 'Replace All' to overwrite the old files. Enjoy!
Reskin Installation:
Matt Jauchler's reskins can be used with this mod. Move all the reskin files to where Matt Jauchler’s reskin readme tells you to. If you get a prompt asking you to replace the files, do not replace them. Replacing them will cause my mod to not work properly.
Tags: acs-64 acs64 amtrak enhancement-mod new-york-to-new-haven nynh
Files
AmtrakACS64EnhancementMod.zip 60 MB · Added 17 Nov 2021 · Downloaded 1,679×Comments
I still have the old version with only one train and I'm not noticing any audio glitches.
alright
So...
wait, are you having problems with the sounds? you said you aren’t.
I'm saying, if it wasn't a problem in the first place, why mention it?
oh that's for the ai train. if you try using the ai acs-64, there will be sound glitches, since they only work correctly for the ai trains.
I don't get amps from 642 but i get amps from the normal ACS-64
Hey I'm loving the mod in quick drive, but when I load up a career scenario with this there is no sound in the cab, a lot of stuff is glitched out, and most of the sounds dont play.
you’re using the ai acs64. make a custom consist using the player acs64.
I made a custom consist for the player ACS, and the mod seems to be running fine, except for a couple of things:
I can't quill the horn with N
The Radio and Train approaching sound effects don't seem to work
what route are you using? those features don't work in some routes because some routes cause custom keybinds to not work.
I have tried it on Washington to Baltimore and New haven to New york. I've seen those extra sounds work on videos on the nhv -boston route but that might be because it's a workshop route
it should work on new york to new haven
So i have the mod installed but everytime I get to a certain point on the NEC Route the loco just stops the whole train and then i can't get it moving again
you're probably using it on the original nec. the signalling on that route doesn't work with newer nec trains. you need to turn off the safety systems.
I can't believe this mod is finally back! The sounds are good, interesting thing is some acs-64 ai even use e-bell lmao.
Looking forward to your Acela/Amfleet ep's and washington baltimore compatibility.
i actually added the e bell to the ai. that's why it's important to use the player version. lol
i need Amtrak Acela Enhancement mods
I have no amps, what do I do??
not sure. it might be rw enhancer if you have it. not sure why but that seemed to cause the no amps glitch for someone else.
i dont have rw enhancer
same it won't move
Have y'all found an anwser? I dont have RW enhancer...
almost over a year and ive finally found a possible solution
after releasing the brakes on the hud (f4) go into the cab and find the red lever, thats the automatic brake, pull it towards you until fully released and it should run, that worked for me
For some reason when I am stationed my bell in uncontrollable and once I start to move then it turns on and unable to turn off
Is there like a certain code in the enhancement where the bell automatically turns on somewhere?
you're not using the correct acs-64. read the description. it's in bolded letters.
Hi so Installed the mod the exact way it's telling me to, but when I loaded in the locomotive it's coming out looking like this..
and worst of all, it's not running nor working
is there a solution to this?
How do I make it so the bell activates when I press "B" or the horn is blown? As of right now, it only turns on when the locomotive moves and turns off when stopped.
Are you going to do the AEM-7?
Hey I trying it use it But it not Moving ACS-64 Running Can you fix it for me Please
Add a comment
If you wish to leave a comment, please log in .
About this mod
- Created
- 17 Nov 2021
- Updated
- 17 Nov 2021
- Game
- Train Simulator Classic
- Type of content
- Enhancement pack
Finally, its returned! thank you for this
Oh and quick question, wheres that amfleet mod at?
I don't seem to be drawing any amps either
amfleet mods are coming soon. i'm not sure why you're not drawing any amps. maybe you don't have electrified tracks?
I have tried on electrified tracks but I've released all the brakes and applied power several times, is there a unique setup procedure?
no. is everything on, like sparks constantly showing, all lights stuck on.
Nope the script works fine, it just won't draw any amps and start moving
that’s weird. what route are you playing on?
I've tried on both the original NEC at Philly and New York New haven at penn
I did get this working in the end, and it's an amazing mod.
that’s good! how did you fix it? also, thanks!
It was RW Enhancer 2 causing the issue, turns out it modifies engine scripts so it probably ended up borking this one
oh. lol