Fixes running sound volume levels in the cab so you can actually hear points/switches, on-train cab rattles and squeaks giving a more immersive sound experience. For whatever reason DTG added these sounds but didn't put any volume to them.
https://youtu.be/0R_9O1Phrpk (updated clip)
Requirements
DTG Harlem Route
Installation Instructions
Put the pak in your TSW DLC folder.
Files
Bescot-Harlem-M3ASounds_TSW4.pak 6 MB · Added 8 Oct 2023 · Downloaded 616×^ For TSW4
^ For TSW2 / TSW3
Previously uploaded files have been downloaded 877 times before being withdrawn.
Comments
Hi, Thanks - I'll have a look at those sounds and see what I can do
Hi, a good mod for uplifting the faint default sounds, but points sound are very loud (sounds like the speakers will blow up) and the motor sounds seem to have disappeared with this.
Could you also maybe please make the airbrake release sound a bit louder too in your next update?
Yea, I've re-upped the pak to make those changes. Trouble with the point sounds is that DTG seems to use the same sound at 5mph than at 70mph and increase the volume for higher speeds. Hope this version is better though.
Great little mod, but i have to agree with the other comments all the sounds seem to just be louder than they need to be.
Thank you for your sound mods! Driving with these is really enjoyable!
Great mod, but the joint sounds are still very loud, even post revision, especially since I play with a subwoofer and desktop speakers. Is it possible to release a separate version without the joint sounds?
I've found clipping which is causing a distortion in a few of the joint sounds and will prepare a revision which should hopefully fix them, on both of the Harlem sets
First of all, I want to say. I really appreciate what you did on both set, and I am really enjoying it. Is it possible, you could add the junction sound from the LIRR, cause that junction sound was really good, and make it a little more clearer because is still a little kind of muff, but to an audio that is really comfortable for everyone here? Also is it possible to make us be able to hear the clickely clack sound, outside the train cause i still somewhat hears its muff, when going over junction and track. Thanks again for this wonderful mod, and i look forward to seeing an update. :)
The track & joint sounds are identical in both LIRR and Harlem. Sorry, I can't increase volume of the junction/joints, as if you read above - any higher than this limit is breaking peoples subwoofer speakers.
How about the clickely clack sound? Is there something you can do about this? Thanks
Is there any way you can increase the AC volume a little louder cause i can't hear the humming of the AC?
If you were to hear the M3 on the LIRR, you can actually hear the humming off the AC on and the fan blowing. Other than that Everything is good.
Sound mod is now perfection! Fantastic work!
PERFECT, The sound is good now, Thanks Bescot :)
Very good sounds ! Thanks
but I have a problem: when I land with the mouse on the controls in the cabin they appear in English while my game is in French.
By removing the patch I find my command description in French (Language of my game)
Thanks in any case
hello Besco : the addon works perfectly. I find the description of the commands in French
Thank's a lot !
Hi there, this is a huge improvement very well done, I was just wondering if you could remove the traction motor sound as in reality you can barely hear them, and even if you can they do not sound like the ones DTG used XD
Many thanks.
the engine sounds are very loud now
I cannot win - there are people who say they are too loud, some say too quiet. I haven't touched the motor sounds at all so this must be a placebo. If you check inside the pak you'll find NO motor sounds as the mod just uses the original ones!
Unless you mean the AC fans? They are loud in reality but I'll see what feedback I get off others
then it must be the fans that are louder but anyways real good work thx !!
Yes, sorry they are too loud, not the same version as I've been testing myself. Update coming shortly
After downloading the latest version, there's the loud ambient noise in the cab the whole time. Maybe you could reduce them down a little bit and maybe make the airbrake release sound a bit louder.
Yes, sorry the HVAC is too loud. Update coming shortly
do ya think you could spice up LIRR with these sound enhancements? I like the route but the sounds arent buying it for me unlike MNRR. Especially with the M3, the door sounds are a hudge yikes, and the only sound mod that fixed them aint compatable anymore
is it possible if you could do one for sandpatch? to make the wheel bogie and joints and clatter sounds louder and more realistic? also i like transpo's suggestion.
good sounds btw
Have you tried Bescot-CoreUSfreightcarsounds.pak from https://www.trainsimcommunity.com/mods/c3-train-sim-world-2/c20-sounds/i2430-bescot-tmd-mini-sound-mods
.
i'll try it out i don't know how i missed it. i was kinda thinking of using the krellnut ones originally made for train simulator 2015 now train simulator classic, but thanks. i'll let you know how it sounds
i tried them but they sound a bit too quiet. but i tell you what. i got some us freight train wheel sounds i recorded from youtube videos. problem is i don't really know how the create a pak from it. if you have the time and can show me how to do it that's be great. thanks. or we could work on it together if it's ok
If you need some help, some stickies here in #tsw-modding https://discord.gg/xVCxPUTk or you can ask for guidance with editing and building mods with the UE4.26 editor
Does this work with Epic Games version?
Thank you so much for your hard work; these new sounds are fantastic!
Add a comment
If you wish to leave a comment, please log in .
About this mod
- Created
- 20 Mar 2022
- Updated
- 8 Oct 2023
- Game
- Train Sim World
- Type of content
- Sound
- Train Sim World compatibility
- Train Sim World 2: Steam version (UE4 4.26), Train Sim World 3, Train Sim World 4
- Train Sim World Content
- Harlem Line: Grand Central Terminal - North White Plains
More by Bescot
TSW4 | Goblin Line Enhancement Pack
Patch for Train Sim World · by Bescot, JetWash and SprattyHeath · 13 days ago
Fife Circle Enhancement Pack (WIP)
Patch for Train Sim World · by Bescot, JetWash and ROB S · 16 days ago
Points sound very loud on high speed (aproximary at 30+ MpH). Fix it, please, and it will be one of the best sound mod