[OTS] 6S83 Clitheroe - Gunnie Clyde Cement Scenario Pack

Two scenarios for the West Coast Main Line - Over Shap Route.

Description:
You join 6S83 at Preston awaiting the path to depart north. Unfortunately 37030 ran
into issues along the way from Clitheroe and it was decided that 37183 would be tasked to
continue ahead and take the strain due to no suitable locos nearby to assist. That been said
you will be looped along the way to make way for higher priority services to pass you at
Carnforth and Grayrigg where part 1 will end. Part 2 will resume later again from Grayrigg
Loop after higher priority workings have passed you. However you will again soon find
yourself in another loop at Tebay! You will have the climb at the foot of you to Shap so give it
your all! You will then have a stead decent to Carlisle where 37183 can breath a little. Your
maximum speed permitted on this trip is 60mph, enjoy the noise of English Electric traction
working hard!

Traction:
37183 & 37030 (DIT)

Route Covered:
Preston – Gretna Junction

Date:
27/05/1986

Duration:
195 Minutes

Requirements:
See attached PDF below.

Tags: cement class-37 freight west-coast-main-line

Files

6S83 Clitheroe - Gunnie Clyde Cement Pack Requirements.pdf 190 KB · Added 8 Feb 2025 · Downloaded 201× 6S83 Clitheroe - Gunnie Clyde Cement Scenario Pack.7z 358 KB · Added 8 Feb 2025 · Downloaded 125×

Comments

Avatar of StephenB
StephenB 14 Feb 2025

The initial red wouldn't clear for me and I waited until 1706 before giving up. When should the signal have cleared at Preston in Part 1? I can see the ETA clock starting to tick at 1657:50.

Avatar of On Track Simulation

The signal should clear around 2 - 3 minutes into the scenario, it awaits a blocker ai to move (JT invisible stock) do you have a Just Trains Common library installed ?

Avatar of StephenB
StephenB 15 Feb 2025

I do. I might just have to tab through that signal once the blocker has moved on.

Avatar of SpaceIguana
SpaceIguana 16 Feb 2025

Part 1 is unplayable.

Signal leaving Preston needs a TAB
Signal leaving Carnforth remains red.
When reaching Grayrigg goods siding, although the signal works the points do not change leaving you on the main.

Add a comment

If you wish to leave a comment, please log in .

About this mod

Created
8 Feb 2025
Updated
8 Feb 2025
Game
Train Simulator Classic
Type of content
Scenario
Geographical area
United Kingdom
Avatar of On Track Simulation
1980-1989 Scenarios
by On Track Simulation